SPECIALS @ PRIME MACHINERY GROUP INC.

ITEM NUMBER: 6908 PUMPS: VACUUM:

VACUUM PUMP 400 CFM SULZER/BRINGHAM 3-GH S/S ONE (1) UNUSED SULZER/BRINGHAM MODEL 3-GH 400 CFM STAINLESS STEEL VACUUM PUMP.  RATED 20"HG @ 1170 RPM.  G-193 HEAT. REQUIRES 20HP DRIVE.


ITEM NUMBER: 8841 PUMPS: VACUUM:

VACUUM PUMP 500 CFM STOKES 812F FV 25HP


ITEM NUMBER: 10225 MIXERS: DOUGH:

DOUGH MIXER 140 QT HOBART V-1401 ONE (1) RECONDITIONED HOBART MODEL V-1401 APPROXIMATELY 140 QUART WORKING CAPACITY VERTICAL SINGLE PLANETARY MIXER.  STAINLESS STEEL 22-1/2" DIAMETER X 25" DEEP BOWL AND (1) FLAT BEATER.  (4) SPEED CAPABILITY.  5HP 3/60/208 VOLT 14.4 AMP EXPLOSION PROOF DRIVE.  S/N 1538672.  SPEC #8788. INCLUDES BOWL CART ON CASTERS.  WILL BE CLEANED, PAINTED, AND TEST RUN.


ITEM NUMBER: 3183 MIXERS: DOUGH:

DOUGH MIXER 140 QT HOBART V-1401-H ONE (1) USED HOBART MODEL V-1401-H APPROXIMATELY 140 QUART DOUGH MIXER. 5HP DRIVE.  INCLUDES (2) 140 QUART BOWLS, (3) STAINLESS STEEL AND (1) ALUMINUM BLADES, AND (1) BOWL DOLLY.


ITEM NUMBER: 11322 TANKS: S/S ATMOS W/JACKET OR COILS:

TANK 500 GAL S/S VERT JKT OT DB ONE (1) USED APPROXIMATELY 500 GALLON CAPACITY VERTICAL TANK.  STAINLESS STEEL. PRESSURE JACKET. OPEN TOP.  DISH BOTTOM W/2" OUTLET.


ITEM NUMBER: 10046 MIXERS: RIBBON:

RIBBON 150 CF C/S DBL 15HP NON JKT EBO ONE (1) USED APPROXIMATELY 150 CF WORKING CAPACITY DOUBLE RIBBON BLENDER.  CARBON STEEL CONSTRUCTION.  48" WIDE X 138" LONG X 50" DEEP NON-JACKETED TROUGH.  3.5" DIAMETER SHAFT.  .5"X 3.5" INNER AND .75"X 2" OUTER RIBBONS.  OUTBOARD BEARINGS AND PACKING GLANDS.  TOP COVER W/26"X 26" HINGED MANWAY AND 40"X 40" INLET.  8"X 8" END BOTTOM OUTLET.  FALK 1307J-24A 25HP 23.79:1 REDUCER TO 15HP 3/60/220-440 VOLT EXPLOSION PROOF MOTOR.  INCLUDES SCREW DISCHARGE CONVEYOR W/PNEUMATIC CLUTCH CHAIN & SPROCKET MAIN SHAFT DRIVE.  (4) AVAILABLE


ITEM NUMBER:  3046 MIXERS: RIBBON:

RIBBON 24 CF S/S DBL 7.5HP JKT CBO ARECO FOOD ONE (1) USED ARECO APPROXIMATELY 24 CF WORKING CAPACITY DOUBLE RIBBON BLENDER.  POLISHED STAINLESS STEEL INTERIOR CONSTRUCTION.  LOW PRESSURE CARBON STEEL JACKET.  26" WIDE X 66.5" LONG X 32" DEEP TROUGH.  OUTBOARD BEARINGS AND PACKING GLANDS.  2-3/8" DIAMETER SHAFT.  INNER & OUTER RIBBONS.  (3) PIECE TOP SS HINGED COVER W/4" DIAMETER INLET. 4" MANUAL SLIDE GATE VALVE ON CENTER BOTTOM OUTLET.  7.5HP 3/60/220-440 VOLT EXPLOSION PROOF MOTOR CHAIN & SPROCKET DRIVE.  PAINTED EXTERIOR.  PREVIOUSLY USED FOR SALADS IN FOOD PLANT.

HOME

[ SERVICES | LIST YOUR EQUIPMENT | SPECIALS | INVENTORY | CONTACT US ]

Copyright 2000 Prime Machinery Group Inc.  All Rights Reserved.